Recording; Operation Mode - JVC GR-DVX7 Instructions Manual

To turn on the camcorder, first set the Power
Switch to any operation mode except "OFF",
then pull out the viewfinder fully or open the
LCD monitor. When setting the Power Switch,
press and hold the Lock Button.
Lock Button
A M
Operation Switch
According to the Operation Switch position
you have selected, "F.AUTO" or "MANUAL"
appears in the upper left corner.
F . AUTO
PAUSE
MANUAL
PAUSE
If the Power Switch is set to "
" ", these indications do not appear.
Power lamp
Power Switch
When set to " "
When set to " "
(When the Power
Switch is set to "5S",
"MANUAL" blinks.)
" or

Operation Mode

Turning the Power Switch and Operation Switch allows
you to choose the appropriate operation mode among the
following table:
Power Switch/
Operation
Switch Position
Suitable for standard recording on
a tape.
5 second
Allows you to record on a tape in

recording

5-second clips to keep the action
mode:
moving.
Enables shooting in Manual
5S
mode. However, Focus and
Exposure are the same as in the
Full Auto mode, and it is not
possible to change menu settings
using the MENU/SET Dial.
Digital
Suitable for standard recording in
Still the MultiMediaCard.
Camera:
Allows you to play back a
recording on the tape or to
transfer a still image recorded on
the tape or in the MultiMediaCard
to a computer.
Allows you to display an image
stored in the MultiMediaCard.
Allows you to switch off the
OFF
camcorder. After setting to this
position, Manual Focus and
Exposure Control are automati-
cally reset to "AUTO".
Allows you to record using NO
Full Auto:
special effects or manual
adjustments. Suitable for standard
recording.
Manual: Allows you to set various
recording functions using the
Menus. If you want more creative
capabilities than Full Auto
recording, try this mode.
17
EN
Function