Repairs; Replacing The Heating Elements; Connections; Service Manual - Electrolux W365H Service Manual

Service
Manual

Repairs

Repair work on the machine should only
be done by specially trained personnel.

Replacing the heating elements

When replacing the heating elements,
there is a risk that water still left in the
machine may flood onto the floor. Be sure
to dry up any spilled water since it may
cause people to slip and hurt themselves.
1. Switch off power to the machine by turning
Fig.
4 the main power switch to the 0 position.
2. Remove the front cover.
3. Make a note of how the heating elements are
Fig.
connected.
5
4. Disconnect the connection to the heating
element to be replaced.
5. Unscrew the nut between the connections
approx. 1 cm.
6. Push on the nut and bolt to undo the
expansion bracket from the outer drum.
7. Remove the old heating element and install
the new one. Be sure that the rear edge of is
fitted into the element holder at the rear of
the outer drum.
8. Assemble in reverse order.
438 9146-41/03
03.20
40. Heating
4
5
Heating element
Temperature sensor
40
Main power switch
5207
5204
5