Setup Menu Functions - Honeywell HCD92534 User Manual

SETUP Menu Functions

Menu Item
1 LENS
2 SHUTTER
3 WHITE BAL.
(White Balance)
4 BACKLIGHT
5 AGC (Automat-
ic Gain Control)
6 DNR
(Digital Noise
Reduction)
7 DSS
(Digital Slow
Shutter)
!
8 SPECIAL
10 EXIT
Document 900.0865 Rev A
04/07
Option Description
DC ! Selects Lens type (the HCD92534 only supports DC
VIDEO mode at this time; choosing any other mode may cause
MANUAL incorrect/unpredictable camera operation).
FLK
Adjusts shutter settings.
ESC !
Flickerless mode (FLK) reduces on-screen flickering.
MANUAL
Electronic Shutter Control (ESC) adjusts brightness level
on screen.
Manual mode allows you to adjust the shutter speed from
1/60-1/120,000 of a second (NTSC), or 1/50-1/120,000
(PAL).
FLK is the only option available when the camera lens is
set to the recommended DC mode.
ATW Controls color on the screen.
MANUAL !
Select Auto Tracing White Balance (ATW) when the color
AWC !
temp is 2400
fluorescent light, or outdoors).
Manual mode allows you to increase or decrease the red
or blue factor on screen.
Auto White Balance Control (AWC) automatically adjusts
the white balance to your specific environment.
OFF Provides light level control to overcome severe
LOW backlighting conditions.
MIDDLE
HIGH
OFF Adjusts value of AGC gain.
!
LOW
Increase the GAIN level to brighten the picture
!
MIDDLE
(noise/distortion may develop).
!
HIGH
OFF Reduces noise/distortion on the screen. Increasing the
LOW DNR level reduces noise but may introduce video arti-
MIDDLE facts. DNR is deactivated if AGC is turned off.
HIGH
OFF Automatically provides a clear image under low-light
AUTO ! conditions. You can control the maximum low-light
magnification from 2x to 128x (increasing magnification
may cause noise/distortion). DSS is deactivated when
SHUTTER is set to FLK mode.
Takes you to the SPECIAL menu (see next section).
Exits the SETUP menu and returns to video monitoring.
°K °
-12000 K (for example when under a
15