5.1 Troubleshooting
5.1. Troubleshooting
This section provides examples of possible problems and methods for solving while
using this product.
5.1.1
LED Confirmation
Did you check LEDs at front/rear of this product?
5
Check LEDs at front/rear of this product if trouble occurs. By using LEDs, it is
possible to monitor power supplies and network problems.
Section
1
2
3
5.1.2
Cannot Power On the Device
Is the power adapter connected?
Make sure to use the provided power adapter.
Is power being supplied to the outlet?
SERVIS IP-KVM
144
1p Converter
User's Guide
Refer to
1.3.1 Rear (page 4)
Refer to
1.3.2 Front (page 6)
LED
Status Problem Solving
Power
Off
LED
Ethernet
Off
Link LED
Ethernet
Off
Act LED
Power adapter might be disconnected.
Connect the power adapter.
Ethernet port link is not established.
Check the connection with network devices such
as router and hubs etc.
This LED blinks when network access to this
product is occurred.
If access failure occurs, the LED turns off.