Part 4 Operation; Operation Guide; Description Of Controls - Cobra CR6 Operation Manual

Operation Guide

C
AUTI ON

This appliance is for professional use and
is only to be used by qualified persons.

Only qualified
to carry out installation, servicing or gas
conversion operations.

C o m p o n e n t s
protected (e.g.
manufacturer should not be adjusted by
the user / operator.
1. Cobra appliances have been designed to
provide simplicity of operation and 100% safety
protection.

Description of Controls

(CR9-Gas Range 900 mm shown)
Part 4
:
service persons
h a v i n g a d j u s t m e n t s
paint sealed) by
Oven Control
OFF Position
PILOT Burner
1-7 Thermostat Settings.
Operation
2. Improper operation is therefore almost
impossible, however bad operation practices
can reduce the life of the appliance and
produce a poor quality product. To use this
appliance correctly please read the following
sections carefully:-
are

Lighting the Open Burners.

Lighting the Open Burners. (F - Flame Failure
Option).
the

Lighting the Griddle.

Oven Pilot Ignition.

Oven Main Burner Thermostat.

Turning the Oven to 'Stand-By' Mode.

Oven 'Shut Down'.
8
Gas Control Knobs
Griddle.
OFF Position
PILOT Burner
HIGH Flame
LOW Flame
Piezo Igniter
(Griddles Only)
Open Burners
OFF Position
HIGH Flame
LOW Flame
Rear Burner
Front Burner
(Indicators located
above the Gas Control
Knobs).
Piezo Igniter
(Ovens Only)