NETGEAR WNDR3700v4 User Manual page 77


To view or change the Wireless Repeating Function settings:
Select Advanced > Advanced Setup > Wireless Repeating to view or change wireless
repeater settings for the router.
The following settings are available:
Enable Wireless Repeating Function. Select the check box for the 2.4-GHz or 5-GHz
•
network to use the wireless repeating function.
Wireless MAC of this router. This field displays the MAC address for your router for
•
your reference. You need to enter this MAC address in the corresponding Wireless
Repeating Function screen of the other access point you are using.
Wireless Repeater. If your router is the repeater, select this radio button.
•
Repeater IP Address. If your router is the repeater, enter the IP address of the other
access point.
Disable Wireless Client Association. If your router is the repeater, selecting this check
box means that wireless clients cannot associate with it. Only LAN client associations are
allowed.
If you are setting up a point-to-point bridge, select this check box.
-
If you want all client traffic to go through the other access point (repeater with wireless
-
client association), leave this check box cleared.
Base Station MAC Address. If your router is the repeater, enter the MAC address for the
access point that is the base station.
Wireless Base Station. If your router is the base station, select this radio button.
•
N600 Wireless Dual Band Gigabit Router WNDR3700v4
Advanced Settings
77
Scroll to view
more settings