Connecting The Computer And Printer; Usb Connection - Brother RJ-4030 User Manual

e
Click the [Drivers] tab, and then click
[Change Driver Settings]. If a User
Account Control message displayed,
type in the password, and then click
[Yes]. Choose [Brother RJ-XXXXX],
and then click [Remove...].
f
Choose [Remove driver and driver
package], and then click [OK]. Follow
the on-screen instructions.
g
Close the [Print Server Properties]
window.
The printer driver has been uninstalled.
Setting Up the Printer
Connecting the
Computer and Printer
The printer can be connected to your
computer via USB cable, Bluetooth (RJ-4030
only), Wi-Fi (RJ-4040 only) and the serial
cable.
Install the printer driver before
connecting the printer to the computer.
Note
When connecting via Bluetooth, the
connection settings are saved even after
the printer is turned off.

USB Connection

a
Make sure that the printer is turned off
before connecting the USB cable.
b
Connect the printer end of the USB
cable to the USB port on the side of the
printer.
c
Connect the other end of the USB cable
to the USB port on the computer.
1
1
1
21