Connecting The Computer And Printer; Usb Connection; Bluetooth Connection (Rj-4030 Only) - Brother RJ4040-K RuggedJet w/WiFi Battery User Manual

Connecting the
Computer and Printer
The printer can be connected to your
computer via USB cable, Bluetooth (RJ-4030
only), Wi-Fi (RJ-4040 only) and the serial
cable.
Install the printer driver before
connecting the printer to the computer.
Note
When connecting via Bluetooth, the
connection settings are saved even after
the printer is turned off.

USB Connection

a
Make sure that the printer is turned off
before connecting the USB cable.
b
Connect the printer end of the USB
cable to the USB port on the side of the
printer.
c
Connect the other end of the USB cable
to the USB port on the computer.
Bluetooth Connection
(RJ-4030 Only)
1
Note
Follow the recommendations of the
manufacturer of your Bluetooth-equipped
computer or Bluetooth adapter and install
any necessary hardware and software.
Use this procedure to pair the printer with the
computer using the Bluetooth management
software.
a
Press and hold the
turn the printer on and then press and
hold the Bluetooth button.
b
Use your Bluetooth management
1
software to discover the printer and
configure the printer connection.
Note
If the software prompts you to enter a
Bluetooth passkey (PIN code), enter the
passkey assigned to the printer. The
printer's passkey is the last four digits of its
serial number by default.
c
Write down the name of the port used for
the connection.
d
Open the printer screen so that the
printer's port settings can be changed.
®
Windows
[Start] - [Control Panel] - [Printers and
Other Hardware] - [Printers and
Faxes].
Windows Vista
Start button - [Control Panel] -
[Hardware and Sound] - [Printers].
®
Windows
Start button - [Devices and Printers].
e
®
Windows
Right-click the printer icon, and then
click [Properties].
®
Windows
Setting Up the Printer
(Power) button to
XP:
®
:
7:
®
XP/Windows Vista :
7:
1
1
21