Sharp MD-DR470H Operation Manual page 52

! Creating a group before recording
You can create a group in advance and record tracks in it.
(Group reserve)
1
Insert a MiniDisc.
2
Whilst in the stop mode, press the MENU button.
The unit enters the menu select mode.
3
Select "GROUP" by pressing the
or button and press the
MENU button.
4
Select "RESERVE" by pressing
the or button and press
the MENU button.
The unit will enter the character in-
put mode.
5
Enter the group name (page 43, steps 6 - 7).
Otherwise, you will not be able to create a group.
6
Hold down the MENU button for
2 seconds or more.
The created group name will be dis-
played.
Note:
Even if you create a group using the GROUP RESERVE func-
tion, it will not be played if no track is recorded in it. (Group
name will not be displayed either.) To check the contents of
the group, refer to "To search a desired group" (page 22).
To record in the created group:
Refer to "Adding tracks to an existing group" (page 18).
! Moving non-group tracks to after group-
recorded tracks
If non-group tracks are found in the middle of a group-
recorded MD, they can be moved to after group-recorded
tracks. (Group arrange)
1
Insert a group-recorded MiniDisc.
2
Whilst in the stop mode, press the MENU button.
The unit enters the menu select mode.
3
Select "GROUP" by pressing the
or button and press the
MENU button.
4
Select "ARRANGE" by pressing
the or button and press the
MENU button.
5
Press the MENU button.
Non-group tracks are moved to after
group-recorded tracks.
Caution:
All non-group tracks are moved to after group-recorded
tracks by "GROUP ARRANGE".
The track order of moved tracks will not be maintained.
Perform this after consideration.
02/12/18 MDDR470_SEEG_E.fm
MD-DR470H
ENGLISH
E-52