Sharp MD-DR470H Operation Manual page 16

5
Press the MENU button.
The unit enters the menu select mode.
6
Select "REC MODE" by pressing the
button and press the MENU button again.
7
Select the recording mode (step 3, page 32) and
press the MENU button.
SP/STEREO Stereo recording.
LP2 2 times long recording.
LP4 4 times long recording.
SP/MONO Monaural recording.
8
Press the button.
9
Begin playback on the stereo system, the output will
be recorded.
Notes:
! Changing the volume level whilst recording does not
affect the recording.
! You cannot adjust the bass or treble level whilst
recording.
! When recording, it is recommended to use the AC
adaptor and also install the battery. Should the power
failure occur, the power source will be automatically
switched to the battery.
To interrupt recording
Press the button.
! To resume recording, press the
! The track number will be increased by one each time
or
the recording is interrupted.
To stop recording
Press the button.
! When recording stops, "TOC" appears. Whilst "TOC"
appears, the MiniDisc recorded contents have not yet
been updated.
! To prevent the new recording from being lost, it is not
possible to remove the MiniDisc whilst "TOC" is dis-
played.
TOC display
To update the recorded contents of the
MiniDisc
Press the button whilst in the stop mode.
The power turns off after recorded contents have been
updated on the MiniDisc.
02/12/18 MDDR470_SEEG_E.fm
MD-DR470H
ENGLISH
button again.
E-16