Bosch DIVAR 3000 Series Quick Manual

Security Systems
Product
DIVAR 3000/5000
Video Recorder DIVAR 3000 and 5000 family
1 DIVAR 3000/5000 firmware version 1.1.0 (date 2013-11-12)
File name: DVR.V1.1.0.LB.R.20131112.bin
This release includes the following new features/improvement:
Supports a full bandwidth control. This means that, when the bandwidth limitation is
-
active, all DVR network communication will be limited to the selected bandwidth setting.
Bandwidth limit can be set to off (default), 256 kbps, 512 kbps and higher. For example,
-
when the bandwidth limitation is set to 256 kbps, than the network traffic will not exceed
the 256 kbps.
In this version the bandwidth limitation can be set active via a BVC site.xml connection.
-
Therefore BVC will inform DVR if it should stream with or without bandwidth limit.
Second encoding stream will be configured automatically to accommodate the selected
-
bandwidth limit. For example if bandwidth limit is set to 256 kbps than encoding settings
of all cameras will be set to 64 kbps for the 2
cameras.
BVC playback, under low bandwidth control, streams I-Frame only to save bandwidth.
-
BVC export, under low bandwidth control, streams all I- and P-Frames. Even though
-
this is a slow process, no frames will be dropped.
BVC software version 1.4 SR5 (v1.4.464) is supporting this firmware v1.1.0
-
Important behavior:
Remote playback under bandwidth control:
-
o Recordings with 30IPS – 4CIF resolution could leads to a situation where
playback is quite difficult to stream in single speed I-Frames with bandwidth limit
set to 256 kbps. This because some I-Frames, especially with a lot of motion, are
already bigger than the 256 kbps.
In this release this is solved to start BVC playback with half-speed when the
recorder is under bandwidth control. This is the default playback speed and can
be changed by the user by pressing FWD so that playback goes to single speed.
Remote live viewing under bandwidth control:
-
o Lowest bandwidth limit can be set to 256 kbps. For live display the 2
automatically set to 64 kbps per camera. For single view the live picture quality
can be improved to select 256 kbps per camera.
Bosch strongly recommends upgrading to the latest firmware to
achieve the best possible functionality, compatibility and
performance.
www.BoschSecurity.com
Document type
Release notes
Release # SAP/Doc number
V1.1.0
nd
stream to optimize viewing of four
Release date
2013.11.13
nd
stream is
Page 1 of 4