Table of Contents
Advertisement
01229A SV-643F/XEF-GB4
9/8/02 4:36 AM
Using the Assemble Edit Function
GB
This function allows you to start a new recording at a specific
position on the cassette while maintaining a very smooth scene
change.
2
ENRG.
MENU
OK
Recording from Another VCR or Camcorder
You can copy a cassette to your VCR from another video source,
such as another VCR or a camcorder.
MARCHE/MINUT.
EJECT
LECTURE
R.R.
A.R.
VIDEO
G AUDIO D
STATIONS
ENRG.
STOP
AUX
ENRG.
MENU
6
OK
38
Page 38
1
Insert the cassette to be edited in your VCR.
❿ II
2
Press the
button to start playback.
3
When you reach the position from which you wish to start the new
❿ II
recording, press the
button.
IM/IM
4
Press the IM/IM (
) button as often as necessary to advance
frame by frame, until the exact recording position is located.
5
While the VCR is in still mode, press the ENRG. button to activate
the Assemble Edit function.
6
Select the source from which you wish to record by pressing:
The ST. ($ or ❷) buttons for television channels
The ENTRÉE button for the AV1, AV2 or AUX input sources
7
❿ II
Press the
button to start recording.
8
When you have finished recording, press
.
It is an infringement of copyright laws to copy prerecorded
cassettes or to re-record them in any form without the
permission of the owners of the corresponding copyright.
1
Connect the VCR, from which the cassette is to be copied, to the
appropriate SCART audio and video input connectors on the rear
of your VCR.
You can also use a RCA audio and video cable to connect the
AUX input on the front of your VCR.
2
Insert a blank cassette in your VCR.
3
Insert the pre-recorded cassette in the other video source (VCR or
camcorder).
4
Press the ENTRÉE button to select the appropriate input on your
VCR:
AV1 or AV2 for the SCART input
AUX for the RCA input
5
Start playing back the cassette to be copied.
6
Press the ENRG. button to start recording on your VCR.
7
When you have finished recording, press
on both VCRs.
Audio Dubbing a Pre-recorded Cassette
With the Audio Dubbing function, you erase the previously
recorded sound and replace it with a new soundtrack from:
A CD player
A microphone connected to a sound system
A cassette player
Restriction:
Audio dubbing is applicable only to the longitudinal audio track
(normal audio).
1
Connect an RCA audio cable to the appropriate output on your
sound system (CD/cassette player for example).
2
Connect the other end of the RCA audio cable to the audio input
connectors (G, D) on the front of your VCR.
3
Insert the pre-recorded cassette on which the audio track is to be
❿ II
replaced, and press the
to start playback.
4
Find the scene that you want to over-dub and press
remote control.
5
Press DUB.
Result:
Your VCR is now in the Audio dubbing Pause mode.
6
On the sound system, locate the point on the CD or cassette at
which you wish to start playback.
Example: The track that you wish to record on the cassette.
7
When you are ready:
Start playback on the sound system
Press ENRG. on the remote control.
Result:
The soundtrack is replaced on the pre-recorded cassette.
The new sound will be recorded on the normal sound
track of the tape, and the original sound will remain on
the Hi-Fi sound track.
To hear the new sound and original sound mixed
together, press the Audio button on the remote control
until the MIX option is displayed (see page 31).
4
5
VIDEO EDIT
6
A.DUB
10
A.DUB
MARCHE/MINUT.
EJECT
VIDEO
G AUDIO D
STATIONS
AUX
2
2
❿ II
on the
4
ENRG.
MENU
OK
VITESSE
DUB
TV/VCR
PROG.
5
DUB
0:05:23
39
GB
Advertisement
Table of Contents
