Table of Contents
Advertisement
01229A SV-643F/XEF-GB3
9/8/02 4:45 AM
Using the TIMER Programming Feature
GB
The TIMER Programming feature allows you to preset the VCR to
record a programme up to one month before that programme is to
be broadcast. Up to six programmes can be preset.
PROG
PROG
OPTIONS
INSTALL
CLOCK
BONUS
LANG
MINUTERIE
➛❿!!
OK
FIN:
MENU
$ ❷!!
** OPTIONS PROG. **
NORMALE
SHOWVIEW
❿
FIN:
MENU
$ ❷
1/JAN LUN
21:28
PROG
ST JOUR
DÉBUT FIN
V/P
1 LU 1 12:00 12:50
P
STD
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
➛❿
$ ❷
EFFACE:ANNUL./RàZ
MENU
M.A./MINUT.
EJECT
17
RALENTI
SHUTTLE
26
Page 26
Before presetting a recording, check that the date and
time are correct.
1
- Insert the cassette. Press the PROG. button.
Press the
or
buttons to select the
NORMALE
$
❷
then press the ❿!button or,
Press MENU on the remote control.
Result:
The programming menu is displayed.
Press the OK button to select
MINUTERIE
option.
Result:
The
MINUTERIE
menu is displayed.
2
Press ❿ to select the input source.
3
Select the required station by pressing the
,
buttons or
$
❷
ENTRÉE to select the AV1, AV2 or AUX input sources.
4
Press ❿ to select the recording day.
5
Select the required day by pressing the
or
buttons.
$
❷
6
Press ❿ to select the recording start time.
7
Select the required hour value by pressing the
or
$
❷
8
Press ❿ to select the minutes.
9
Select the required minute value by pressing the
or
$
10
Press ❿ to select the recording end time.
11
Select the required recording end time by pressing the
buttons, following the same procedure as when selecting the
recording start time.
12
Press ❿ to select the recording speed (AUTO/STD/DBL).
13
Press the
or
buttons to switch between the
$
❷
(Standard Play),
DBL
(Long Play) recording speeds.
14
Press ❿ to select the VPS or PDC(V/P) recording mode.
15
Press the
or
buttons to toggle between the VPS or PDC
$
❷
mode (marked
P
) and the non-VPS/PDC mode (marked
16
When you have finished, press the MENU button.
17
Press the M.A./MINUT. button to activate the timer.
If you wish to turn the timer off any reason simply press the
M.A./MINUT. button again.
Result:
Before starting recording, the VCR compares the timer
duration with the remaining time on the cassette.
Auto Tape Speed Select
The VCR's "Auto Tape Speed Select" function compares
the duration of the timer recording to the actual recording
time remaining on the tape loaded. If there is insufficient
tape to complete a timer recording in AUTO mode, the
VCR automatically switches to LP mode to record the
whole programme.
E.g.
If there is a one hour Timer Recording in AUTO
mode to be started, and only 40 minutes tape
remaining, the VCR will record in SP for 20
minutes and switch to complete the remaining 40
minutes in LP mode.
Checking a Preset Recording
You can check your preset recordings:
When you have finished presetting the VCR
If you have forgotten which programmes will be
recorded
Before the VCR enters the timer standby mode
option and
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
2
Press the OK button to select this option.
Result:
The
MINUTERIE
3
Press the
or
buttons to select the required programme.
$
❷
4
Press the ➛ or ❿ buttons to select and change any values as
required. For more details, refer to the previous page.
5
On completion, press MENU.
buttons.
buttons.
❷
Cancelling a Preset Recording
or
$
❷
You can cancel any programmes that are:
Incorrect
No longer required
AUTO
,
STD
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
2
Press the OK button to select this option.
Result:
The
MINUTERIE
-
).
3
Select the programme to be cancelled by pressing the
buttons.
4
Press the ANNUL./RàZ button to cancel the selected programme.
Result:
All the recording information is deleted and the broad-
cast will not be recorded.
5
On completion, press MENU.
1/JAN LUN
PROG
ST JOUR
1 LU 1 12:00 12:50
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
$ ❷
EFFACE:ANNUL./RàZ
menu is displayed.
1/JAN LUN
PROG
ST JOUR
1 LU 1 12:00 12:50
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
$ ❷
EFFACE:ANNUL./RàZ
menu is displayed.
or
$
❷
ANNUL./RàZ
4
ALIGN.AUTO
AUDIO
GB
21:28
DÉBUT FIN
V/P
P
STD
❿
RÉGLER:
MENU
21:28
DÉBUT FIN
V/P
P
STD
❿
RÉGLER:
MENU
IM/IM
INDEX
IPC
ENTRÉE
RÉPÉT.
AFFICHAGE
27
Advertisement
Table of Contents
