Table of Contents
Advertisement
Fax switch
The built-in fax switch enables you to phone and
fax from the same telephone connection and use
additional devices. The fax switch separates fax
and voice messages. For example, it can receive
fax messages silently, i. e. without ringing to avoid
causing a disturbance.
The operating modes S and M for day and
night operation each allow you to decide on dif-
ferent modes during the day and at night; how
often the machine should ring prior to receipt of
faxes or before the answering machine is turned
on.
You may change-over the operating mode be-
tween S and M of your fax machine automati-
cally using the timer function U.
Timer U
The built-in timer U distinguishes between day
S and night M. With the default values the fax
machine will ring during the day when it receives
fax calls and telephone calls. At night (10:00 p.m.
- 6:00 a.m.), faxes will be received without ring-
ing and telephone calls will be announced with a
quieter ring. You can also change these settings
as desired.
If the U symbol is displayed the timer is acti-
vated. To switch the timer on or off hold down
the U button for two seconds.
You can change the times when the fax machine
should switch between day S and night M:
1 Select function 33 by pressing MENU, 33
and OK.
2 Enter the time at which you want your fax ma-
chine to switch automatically to S (e.g. 08
00 for 8:00 a.m.) and confi rm with OK.
3 Enter the time at which you want your fax ma-
chine to switch automatically to M (e.g. 23
30 for 10:30 p.m.) and confi rm with OK.
Set SM mode
with built-in answering machine
Display
tAM rings:
fax rings:
Ringer vol.:
listen-in:
1 Select function 31 (day) by pressing MENU,
31 and OK.
2 Select number of rings with u before
your answering device will be activat-
ed.
3 Confi rm with OK.
4 Enter the number of rings after which the fax
machine goes online and separates faxes from
telephone calls. If the call is a fax call the fax
machine switches to reception. Telephone
calls will continue to ring. FAX RINGS: 5
5 Confi rm with OK OK.
6 Using u, determine the ringer vol-
ume when receiving a call. Confi rm with
OK.
RINGER VOL.: HIGH
u
7 Select
with
should be heard while leaving a mes-
sage.
listen-in: on, off
8 Confi rm with OK.
9 To activate mode M select MENU 32
(Night) OK and repeat steps 2 to 8.
without built-in answering machine
Display
Possible settings
total rings:
0, 1, 2, 3, 4, 5, 6, 7
fax rings:
0, 1, 2, 3, 4, 5,
manual reception
Ringer vol.:
low, med, high
1 Select function 31 (Day) by pressing MENU
and numbers 31. Confi rm with OK.
2 Use u to set the number of rings after
which fax reception is activated if the handset
is not lifted.
3 Confi rm your entry with OK.
Possible settings
0, 1, 2, 3, 4, 5, 6, 7,
5/2
0, 1, 2, 3, 4, 5,
manual reception
low, med, high
on, off
TAM RINGS: 5/2
if
the
caller
TOTAL RINGS: 5
13
Advertisement
Table of Contents
