Display Language; Ring Signal Type; Volume - Philips M3 User Manual

Display language

1 Select function 11 by pressing MENU, 11
and OK.
2 Select the desired language with u.
3 Press OK.

Ring signal type

You can choose from ten different types of sig-
nals.
1 Select function 35 by pressing MENU, 35
and OK.
2 Select the desired ring signal with 0 to 9.
3 Press OK.

Volume

Ringer
You can adjust the volume of the ring signal if
the fax machine is in stand-by mode or if it is just
ringing. Please note that different volumes can be
sett for the modus S and M (see chapter Fax
switch).
1 By pressing u the display shows the cur-
rent setting for about three seconds.
2 Change the volume by pressing u until
the desired volume is achieved.
Speaker
You can adjust the volume of the loudspeaker
at any time by pressing DIAL (without built-in
answering machine) or l (with built-in answer-
ing machine).
1 Press DIAL / l.
2 Change the volume by pressing u until
the desired volume is achieved.
3 Finish your entry by pressing STOP.
12