Static Routes - NETGEAR MR814 Reference Manual

Reference Manual for the Model MR814 Wireless Router
Click the Add button.
1.
In the IP Address box, type the IP address to assign to the PC or server.
2.
(choose an IP address from the router's LAN subnet, such as 192.168.0.X)
Type the MAC Address of the PC or server.
3.
(Tip: If the PC is already present on your network, you can copy its MAC address from the
Attached Devices menu and paste it here.)
Click Apply to enter the reserved address into the table.
4.
Note: The reserved address will not be assigned until the next time the PC contacts the router's
DHCP server. Reboot the PC or access its IP configuration and force a DHCP release and renew.
To edit or delete a reserved address entry:
Click the button next to the reserved address you want to edit or delete.
1.
Click Edit or Delete.
2.

Static Routes

Static Routes provide additional routing information to your router. Under normal circumstances,
the router has adequate routing information after it has been configured for Internet access, and
you do not need to configure additional static routes. You must configure static routes only for
unusual cases such as multiple routers or multiple IP subnets located on your network.
From the Main Menu of the browser interface, under Advanced, click on Static Routes to view the
Static Route menu, shown in
Figure 8-4. Static Route Summary Table
To add or edit a Static Route:
8-10
Figure 8-4.
Advanced Configuration of the Router