Attached Devices; Router Software Upgrade - NETGEAR MR814 Reference Manual

Reference Manual for the Model MR814 Wireless Router

Attached Devices

The Attached Devices menu contains a table of all IP devices that the router has discovered on the
local network. From the Main Menu of the browser interface, under the Maintenance heading,
select Attached Devices to view the table, shown in Figure 7-3
Figure 7-3. Attached Devices menu
For each device, the table shows the IP address, NetBIOS Host Name (if available), and Ethernet
MAC address. Note that if the router is rebooted, the table data is lost until the router rediscovers
the devices. To force the router to look for attached devices, click the Refresh button.

Router Software Upgrade

The routing software of the Model MR814 router is stored in FLASH memory, and can be
upgraded as new software is released by NETGEAR. Upgrade files can be downloaded from
Netgear's website. If the upgrade file is compressed (.ZIP file), you must first extract the binary
(.BIN) file before sending it to the router. The upgrade file can be sent to the router using your
browser.
Note: The Web browser used to upload new firmware into the Model MR814 router must support
HTTP uploads. NETGEAR recommends using Microsoft Internet Explorer 5.0 or Netscape
Navigator 4.7 or above.
7-4 Maintenance