Ntp Client - D-Link DIR-300NRU User Manual

DIR-300NRU Wireless Router with Built-in 4-port Switch
User Manual

NTP Client

On the System / NTP client page, you can configure automatic synchronization of the system
time with a time server on the Internet.
To enable automatic synchronization with a time server:
1. Select the Enabled checkbox.
2. Select your time zone.
3. Specify the needed NTP server in the Ntp servers field or leave the server specified by
default.
4. Click the Change button.
When the router is powered off or rebooted, the system time is reset to the default value.
!
If you have set automatic synchronization for the system time, the internal clock of the
device will be configured after connecting to the Internet.
Figure 68. The System / NTP client page.
Page 89 of 93
Configuring via Web-based Interface