D-Link DIR-300NRU User Manual page 40

DIR-300NRU Wireless Router with Built-in 4-port Switch
User Manual
Parameter
Encryption
Authentication
algorithm
Keep Alive
Extra options
IP received
MTU
Interface
Enable RIP
NAT
Firewall
When all needed settings are configured, click the Save button.
Select a method of MPPE encryption.
No encrypt: MPPE encryption is not applied.
•
MPPE 40/128 bit: MPPE encryption with a 40-bit or 128-
•
bit key is applied.
MPPE 40 bit: MPPE encryption with a 40-bit key is applied.
•
MPPE 128 bit: MPPE encryption with a 128-bit key is
•
applied.
MPPE encryption can be applied only if the MSCHAP,
MACHAPv2, or AUTO value is selected from the Authentication
algorithm drop-down list.
Select a required authentication method from the drop-down list or
leave the AUTO value.
Select the checkbox if you want the router to
your ISP even when the connection has been inactive for a specified
period of time. When the checkbox is selected, the LCP interval
and LCP fails fields are available. Specify the required values.
Advanced options of the pppd daemon which need to be specified for
this connection. Optional.
The IP address assigned by the ISP.
The maximum size of units transmitted by the interface.
The name assigned to the connection by the system.
Miscellaneous
Select the checkbox to allow using RIP for this connection.
Select the checkbox if you want one WAN IP address to be used for
all computers of your LAN.
Select the checkbox to enable protection against ARP and DDoS
attacks.
Page 40 of 93
Configuring via Web-based Interface
Description
keep you connected to