DIR-300NRU Wireless Router with Built-in 4-port Switch
User Manual
Also you can restore the factory default settings via the hardware Reset button. The hole of the
button is located on the back panel of the router next to the power connector. Use a small paperclip
to activate the button; insert it into the hole (with the router turned on), push, and hold for 10
seconds. Then remove the paperclip. Wait for about 30 seconds. Now you can access the web-based
interface of the router using the default IP address, username and password.
When you have configured all needed settings, click the Logout line.
Page 22 of 93
Installation and Connection