Alpha Display Keypads - Honeywell Ademco VISTA-21iP User Manual

Ademco vista series
Hide thumbs Also See for Ademco VISTA-21iP:
Table of Contents

Advertisement

Summary of A/V Notifications
SOUND
CAUSE
LOUD,
FIRE ALARM
INTERRUPTED*
Keypad & Ext.
LOUD,
BURGLARY/AUDIBLE
CONTINUOUS*
EMERGENCY ALARM
Keypad & Ext.
ONE SHORT
a. SYSTEM DISARM
BEEP
b. SYSTEM ARMING ATTEMPT
(not repeated)
WITH AN OPEN ZONE
Keypad only
c. BYPASS VERIFY
ONE SHORT
a. SYSTEM IS IN TEST MODE
BEEP
b, LOW BATTERY AT A
(once every 40
TRANSMITTER
seconds)
c. SYSTEM WILL AUTOARM
Keypad only
WITHIN 10 MINUTES
TWO SHORT
ARM AWAY or MAXIMUM
BEEPS
Keypad only
THREE SHORT
a. ARM STAY, NIGHT-STAY,
BEEPS
OR INSTANT
Keypad only
b. ZONE OPENED WHILE
SYSTEM IS DISARMED
RAPID
a. TROUBLE
BEEPING
b. MEMORY OF ALARM
Keypad only
c. SYSTEM LOW BATTERY.
d. EXT. SOUNDER WIRE FAIL
e. LAST 10 SEC of EXIT DELAY
SLOW
a. EXIT DELAY WARNING (if
BEEPING
programmed).
Keypad only
b. ENTRY DELAY WARNING.
* If a bell is used as external sounder, fire alarm is pulsed ring; burglary/audible emergency is steady ring.
– 52 –

Alpha Display Keypads

(cont'd)
DISPLAY
FIRE is displayed; descriptor of zone in alarm is
displayed. If a fire alarm is manually activated,
zone number 95 will be displayed.
ALARM is displayed. If programmed, descriptor
of zone in alarm is also displayed
a. DISARMED/READY TO ARM is displayed.
b. Number and descriptor of open protection zone
is displayed.
c. Numbers and descriptors of the bypassed zones
are displayed (One beep is heard for each zone
displayed). Then, the following is displayed:
DISARMED BYPASS /Ready to Arm.
a. Opened Zone identifications will appear.
b. LO BAT displayed with description of
transmitter.
c. No special display.
ARMED AWAY or MAXIMUM displayed. Red
ARMED indicator lit.
a. ARMED STAY or ARMED INSTANT
displayed. Red ARMED indicator lit.
b. CHIME displayed, descriptor of open
protection zone will be displayed if the [✱] key
is pressed.
a. CHECK displayed. Descriptor of troubled
protection zone is displayed.
b. FIRE or ALARM is displayed; descriptor of
zone in alarm is displayed.
c. SYSTEM LO BAT displayed.
d. BELL FAILURE is displayed.
e. No special display.
a. ARMED AWAY or MAXIMUM is displayed
along with You May Exit Now.
b. DISARM SYSTEM OR ALARM WILL
OCCUR is displayed. Exceeding the delay
time without disarming causes an alarm.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ademco vista-21ipsia

Table of Contents