Configuring Other Alarms - HIKVISION Network Camera User Manual

44
User Manual of Network Camera
Snapshot Settings
Figure 5-36

5.6.9 Configuring Other Alarms

Purpose:
This section is for DS-2CD8464F-EI cube camera only. The DS-2CD8464F-EI camera
supports external wireless alarm (e.g. access control alarm), embedded PIR (passive
infrared sensor) alarm and manual alarm by remote control.
Study the wireless alarm and the remote control
Purpose:
Before configure the wireless alarm, the camera must study the code of the wireless
alarm device; the remote control is used to arm/disarm the camera with the alarms
and trigger the manual alarm. The camera must also study the code of the remote
control before use it.
Steps:
1. Enter the Remote Control interface:
Configuration> Advanced Configuration> System > Remote Control
Remote Control
Figure 5-37
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.