Configuring Network Settings; Configuring Tcp/Ip Settings - HIKVISION Network Camera User Manual

User Manual of Network Camera
Note: If the camera is connected to a public network, you should use a NTP server
that has a time synchronization function, such as the server at the National Time
Center (IP Address: 210.72.145.44). If the camera is set in a customized network, NTP
software can be used to establish a NTP server for time synchronization.
 Configuring Time Synchronization Manually
Enable the Manual Time Sync function and then click
from the pop-up calendar.
Note: You can also check the Sync with local time checkbox to synchronize the time
of the camera with the time of your computer.
4. Check
5. Set the date of the DST period.
6. Click

5.3 Configuring Network Settings

5.3.1 Configuring TCP/IP Settings

Purpose:
TCP/IP settings must be properly configured before you operate the camera over
network.
Steps:
1. Enter TCP/IP Settings interface:
Configuration > Basic Configuration > Network > TCP/IP
Or Configuration > Advanced Configuration > Network > TCP/IP
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Time Sync Manually
Figure 5-5
to enable the DST function.
DST Settings
Figure 5-6
to save the settings.
20
to set the system time