Right Side - Cisco 500 Series Quick Start Manual

500X Right Side

500 Right Side

RJ-45 Ethernet Ports—Use these ports to connect network devices, such
as computers, printers, and access points, to the switch. Standard Ethernet
ports can not be used to stack the switches.
SFP (if present)—The small form-factor pluggable (SFP) are connection
points for modules, so the switch can link to other switches. These ports
are also commonly referred to as miniGigaBit Interface Converter
(miniGBIC) ports. The term SFP will be used in this guide.
• SFP ports are compatible with Cisco modules MGBSX1, MGBLH1,
MGBLX1, MGBBX1, MFELX1, MFEFX1, and MFEBX1, as well as other
brands of modules.
• Cisco SFP+ optical modules that are supported in the 500X switches
are: SFP-10G-SR, SFP-10G-LRM, and SFP-10G-LR.
• The 500 and 500X switches support the following SFP+ Copper Cable
modules for stacking: SFP-H10GB-CU1M, SFP-H10GB-CU3M, and
SFP-H10GB-CU5M.
• SFP interface is a combination port, shared with one other RJ-45
interface. When the SFP is active, the adjacent RJ-45 port is disabled.
• The LEDs of the shared RJ-45 port light to respond to the SFP interface
traffic.
500 Series Stackable Managed Switches 13