Using The Setup Wizard; Fixed Ip (Static) Account Setup - NETGEAR WNR612v2 User Manual

Wireless-N 150 Router WNR612v2 User Manual

Using the Setup Wizard

The Setup Wizard can check your Internet connection for servers and protocols to determine
your ISP configuration. This feature is not the same as the Smart Wizard on the Resource
CD that is used for installation. You can also manually specify your Internet connection
settings in the Basic Settings screen.
To use the Setup Wizard:
From the top of the modem router main menu, select Setup Wizard.
1.
Make sure the correct location is in the Country field.
2.
Select the Yes radio button to use the wizard, and click Next to proceed.
3.
Depending on the type of connection, you are prompted to enter your ISP settings.
4.
For help with a static IP address, see the following section,
on page 9.
Setup
At the end of the Setup Wizard, click Test to check your Internet connection. If you have
5.
trouble connecting to the Internet, see

Fixed IP (Static) Account Setup

If required, enter the account name and domain name from your ISP.
1.
Select Use Static IP Address or Use IP Over ATM (IPoA — RFC1483 Routed) according
2.
to the information from your ISP. If you select IPoA, the router will detect the gateway IP
address, but you still need to provide the router IP address.
Enter your assigned IP address, subnet mask, and the IP address of your ISP's gateway
3.
wireless router. This information should have been provided to you by your ISP.
Enter the IP address of your ISP's primary DNS server. If a secondary DNS server address
4.
is available, enter it also. DNS servers translate an Internet name such as
to a numeric IP address.
At the end of the Setup Wizard, click Test to verify your Internet connection. If you have
5.
trouble connecting to the Internet, see
Chapter 8.
Chapter 7,
Troubleshooting.
Chapter 1: Configuring Your Internet Connection
Fixed IP (Static) Account
www.netgear.com
| 9