Table of Contents
Advertisement
Vise
Adjustable Vise Jaw
NOTICE
Prior to cutting, both the jaw and stability
bracket must be checked for blade clear-
ance. Failure to do this could cause the
blade to contact the vise during the cut,
resulting in damage to the machine.
Figure 24.
To adjust the vise jaw:
1.
2.
Angle
Page 18
3.
Steps 4–7
4.
5.
Note: At certain angle settings, it may not be
possible to set the jaw within the specifica-
tions described above. If this is the case,
adjust the jaw as far as it can go while still
being securely clamped.
Cutting
Figure 26.
6.
7.
Auxiliary Stability Bracket
Page 20
Figure 25
Figure 25.
Figure 26
Step 3
Advertisement
Table of Contents
