Restoring Factory Default Settings - GE 40 User Manual

TruVision DVR 40 User Manual
2. Select either FTP or USB upgrade mode.
3. If you select FTP mode, the FTP Upgrade dialog box appears. Press Enter or left-click the mouse to
confirm. The TVR 40 will connect with the FTP server via network and download the firmware file.
Press Menu, or right-click the mouse, to cancel.
If you select the USB mode, you must connect a USB flash memory to the TVR 40 and confirm that
the firmware file is in the root directory. Press Enter or left-click the mouse to start the upgrade.
Note: The firmware must be downloaded to the USB main directory, and the file named "digicap".
4. After successfully upgrading the firmware, press Menu or right-click the mouse to return to the
main menu.
5. Press OK to reboot the TVR 40.

Restoring factory default settings

To restore factory default settings
1. In the System menu go to the Factory Defaults restore button and press Enter or left-click the
mouse. The factory default dialog box appears.
2. Select OK. The system will automatically reboot.
Caution: If during rebooting the TVR 40 makes a lot of noise, check that the video standard is
correctly set to PAL (default) in the Display menu.
99