Starting The Setup Wizard From Your Pc; Easy Setup Wizard Configuration For Head-To-Head Play - Linksys WGA54G User Manual

Starting the Setup Wizard from Your PC

Next, you will configure the Wireless-G Game Adapter with your PC. The
Setup Wizard will guide you through all the steps necessary.
1. Insert the Setup CD-ROM into your PC's CD-ROM drive. The Setup
Utility should run automatically, and the screen in Figure 5-3 should appear.
If it does not, click the Start button and choose Run. In the field that
appears, enter D:\setup.exe (if "D" is the letter of your CD-ROM drive).
• Setup - Click Setup to proceed with the Setup Wizard.
• User Guide - Click User Guide to open the PDF file of this User Guide.
• LINKSYS Web - Click LINKSYS Web to access the Linksys website
using an active Internet connection.
• Exit - Click Exit to exit the Setup Wizard.
Click Setup to begin the setup process.
2. The Setup Wizard will search for the Game
Adapter.
If it cannot find one, you will be asked to check
the connections, as shown in Figure 5-4.
Review your connections and click Continue.
The Setup Wizard will search again.
8
Instant Wireless
Figure 5-3
Figure 5-4
Series Wireless-G Ethernet Bridge
®
When the Game Adapter is located, you will be
asked to enter your network password. Type the
password in the field, as shown in Figure 5-5,
and click Enter.
After you have entered your password, choose the following set of directions to
configure the Game Adapter. "Easy Setup Wizard Configuration for Head-to-
Head Play" is a simple procedure for verifying correct settings. "Advanced
Setup Wizard Configuration for Head-to-Head Play" allows you to modify the
Game Adapter's settings for Head-to-Head play. "Setup Wizard Configuration
for Internet Play" should be used when configuring the Game Adapter to play
games over a broadband Internet connection. After you have completed these
steps, disconnect the Game Adapter from your PC and connect it to your game
console as shown in "Connecting the Game Adapter to Your Game Console".

Easy Setup Wizard Configuration for Head-to-Head Play

Easy Setup is included for when you wish to verify that the Game Adapter's set-
ting are correct.
1. From the screen
shown in Figure
5-6, select the
Head to Head
(Console
Console) radio
button and click
Next.
to
Figure 5-6
Figure 5-5
9