NETGEAR RangeMax WPN824N User Manual page 27

It should not be necessary to change the wireless channel unless you notice interference
problems with another nearby wireless router or access point. Select a channel that is not
being used by any other wireless networks within several hundred feet of your router. For
more information about the wireless channel frequencies, click the link to the online
document "Wireless Networking Basics" in Appendix
• The default mode is Up to 150Mbps. The options are:
– Up to 54 Mbps – Legacy Mode – Maximum speed of up to 54 Mbps for b/g networks.
– Up to 65 Mbps – Neighbor Friendly Mode – Will not interfere with neighboring
wireless networks.
– Up to 150 Mbps – Performance Mode – Maximum Wireless-N speed up to 150 Mbps.
• The default Security Options is None.
5. Click Apply to save your changes.
Note: If you are configuring the router from a wireless computer and you change the
router's SSID, channel, or security settings, you will lose your wireless
connection when you click Apply. You must then change the wireless settings
of your computer to match the router's new settings.
6. Select Wireless Settings under Advanced in the main menu of the WPN824N router.
Figure 1-11
7. Make sure that the Enable Wireless Router Radio, Enable SSID Broadcast, and Enable
WMM check boxes are selected.
8. Click Setup Access List.
Configuring Basic Connectivity
RangeMax Wireless-N 150 Router WPN824N User Manual
v1.0, February 2010
B.
1-13