Before Starting The Intercom - Cardo Systems SCALA RIDER G4 User Manual

9.3 BEFORE STARTING THE INTERCOM

Your scala rider G4 headset has two buttons designated for quick
connection to two other headsets. These other headsets are referred
to as CHANNEL "A" and CHANNEL "B". In the following sections you
will also learn how to add a third participant and conduct an intercom
conference mode.
Channel "A"
Button
Since the scala rider G4 can be paired with all models among the
scala rider family, we recommend that you first pair it according to
your preferred configuration and then change or modify as often as
you wish later as the need arises. For example: If you typically use the
intercom to communicate with two friends who both use G4 units,
then you should pair it as described below in section 9.10 b.
Therefore, please select your initial pairing preference now amongst
the following options in the table below and following that, refer to
the pairing procedure as described in the respective section of this
manual. When done, return to the explanations in section 9.4 "Initiate
Intercom Calls".
14 scala rider G4
® ™
Select your preferred Pairing Option
HEADSETS TO BE PAIRED
Your G4 with another G4
Your G4 with a Q2
Your G4 with one earlier scala rider model
Your G4 with two other G4 units
Your G4 with one G4 and one Q2 unit
Your G4 with two Q2 units
Channel "B"
Button
Your G4 with one G4 and one other scala rider model
Your G4 with one Q2 and one other scala rider model
Your G4 with two other scala rider models
Your G4 as part of 4-Way intercom call configuration
GO TO
SECTION
9.10 a
9.11 a
9.11 b
9.10 b
9.11 c
9.11 c
9.11 c
9.11 c
9.11 c
9.10 c