Tripp Lite B140-202 Specifications

Model #: B140-202
DVI over Cat5 2x2 Matrix Switch, 2-Port
Description
Tripp Lite's B140-202, 2X2 DVI Matrix Switch allows two DVI Single-Link video sources to be routed to one or two RJ45 outputs and extended up to
150-ft. @ 1920x1200 using Active
sources is done manually or with included remote control. Additional monitors can be added beyond the typical two by using Tripp Lite
daisy-chain Receivers - up to 4 monitors per channel.
System Requirements
DVI video cards and DVI monitors
Package Includes
B140-202 Local Transmitter Unit
External Power Supply ( Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 2A
Mounting Hardware
Remote Control
Owners Manual
Features
Share two DVI video sources between two monitors
Supports DVI Single Link computer resolutions up to 1920 x 1200 @ 60Hz
Allows either input to be routed to either output, or the one input signal to both outputs
Transmits over a single Cat5e/6 cable to a remote monitor up to 200-ft. away
HDCP and EDID compliant
Plug-and-Play
A B140-Series remote receiver is needed at each monitor
Active (powered) and Passive (non-powered) Receivers available
Use 24AWG Solid Wire
Further expand the range and number of monitors with
Compliant with the Federal Trade Agreements Act ( TAA ) for GSA schedule purchases
Specifications
OVERVIEW
Highlights
(powered) Receivers, or up to 50-ft. @ 1920x1200 using
Cat5e/6 patch cable for maximum video performance
Share two DVI sources between two monitors
Supports DVI Single Link computer resolutions up to 1920 x 1200 @ 60Hz
Transmits over inexpensive Cat5e/6 cable up to 200 ft.
Plug-and-Play
Passive
B140-110 Daisy-Chain Repeaters
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com
(non-powered) Receivers. Switching between
Tripp Lite
B140-110