Usb Printer Installation - Buffalo HS-DGL Series User Manual

from the Printer Type pull down menu. Other settings will have to be set based on the printer's
documentation. If a printer is not available from the pull down menu, then it is not supported by
LinkStation.
Press the Apply button when settings are complete. For the printer to work on your network, it
must be plugged into one of LinkStation's USB Ports, and the printer must be powered on. You
may have to turn the LinkStation off and then on again after connecting the USB printer to one of
the USB Ports.
Please see page 46 for information on installing the printer to Windows PC's on your network.
USB Settings - Print Server
Print Server: The Print Server function turns printer
sharing on or off. The Print Server function must be
set to Enable if a printer is to be shared.
By default LinkStation is confi gured to share a
PostScript printer. If that's what you have, leave all
settings at their defaults.
To connect a non-PostScript printer to LinkStation,
consult your printer's documentation for more
information on what needs to be manually confi gured
from this page. then select a compatible printer
48