Standby Screen; Keypad Operations - Cisco OptoStar II Installation Manual

Operating using ICIM LCD, Continued

Standby Screen

OptoStar II ICIM uses a 4.3-inch color LCD screen. Below is the standby screen
after the module has loaded.

Keypad Operations

The table below lists each key on the OptoStar II ICIM screen and its function.
Button
▲
▼
◄
►
SET
EXIT
3-4
Function
In menu view, mode selection and
function switch screens
In reading configuration screen
In menu view, mode selection and
function switch screens
In reading configuration screen
Moves to the previous page/Moves the cursor to the left
Moves to the next page/Moves the cursor to the right
Configure/Save/Enter
Cancel/Return
Operation
Moves the cursor up
Increases numerical
readings
Moves the cursor
down
Decreases numerical
readings
Continued on next page
OL-29669-01