Page 1
6439 E Instruction booklet Electric hob Notice d'utilisation Table de cuisson Istruzioni per l’uso électrique Piano di cottura elettrico...
Page 2
Welcome to the world of Electrolux Thank you for choosing a first class product from Electrolux, which hopefully will provide you with lots of pleasure in the future. The Electrolux ambition is to offer a wide variety of quality products that make your life more comfortable.
Contents For the User Description of the Hob ..................3 Important Safety Information ................4 Before the First Use of the Appliance ..............6 Operation ......................7 Maintenance and Cleaning ................10 Something Not Working? ................. 11 Service and original Spare Parts ..............21 Declaration of guarantee terms (for Belgium only) ..........
English Important Safety Information This new appliance is easy to use. However, make sure to read this handbook before installing and using the appliance for the first time. In this way you can obtain best performance, avoid incorrect operations, use the appliance in complete safety and respect the environment.
• When using a power outlet near this appliance, make sure the cords of The symbol on the product or on any electrical appliances being used its packaging indicates that this product do not touch it and are far enough may not be treated as household away from its hot parts.
Before the First Use of the Appliance Before using the appliance re- move all packaging, including the advertising labels and any protective film. " When using the hob for the first time: 1) place on all the plates a pan filled with some water;...
Operation Electric Hotplates (Fig. 2) To switch on a hotplate, turn the relevant control knob anticlockwise to the required heat setting. The control knob is numbered 1 - 3. 0 - OFF 1 - Minimum 3 - Maximum Rapid Hotplates Rapid Hotplates Rapid Hotplates Rapid Hotplates...
Page 8
Suggestion for the correct setting of the plates are given in the table below. Very Gentle To keep food warm • To melt butter and chocolate. Gentle To prepare cream-sauces, stews and milk puddings or to fry eggs. Slow Dried vegetables, frozen •...
Page 9
or leave it to cool on a switched-off For the correct use of the hotplates hotplate. This could cause damaging For better efficiency of the electric condensation to form. hotplates and lower electricity • For faster cooking and to avoid heat consumption: dispersion, it is advisable to use flat- •...
Maintenance and Cleaning Before any maintenance or The Hotplates cleaning can be carried out, Spills onto the actual plate should be you must DISCONNECT the removed using warm water and a soft hob from the electricity supply. brush, nylon or plastic scourer. To keep the plates looking as new, hotplate This appliance cannot be conditioner can be purchased from most...
Something Not Working? If the hob is not working correctly, please carry out the following checks before contacting your local Service Force Centre. IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.
Instructions for the Installer Engineers technical data Heating elements Ratings Rapid front left Hotplate Ø 145 mm 1500 W Rapid back left Hotplate Ø 180 mm 2000 W Rapid front right Hotplate Ø 145 mm 1500 W Rapid back right Hotplate Ø...
Page 13
Important safety requirements Important safety requirements Important safety requirements Important safety requirements Important safety requirements (for the United Kingdom only) This hob must be installed in accordance with the IEE Wiring Regulations (Current Edition). INSTALLATION GUIDANCE INSTRUCTIONS CLEARANCES REQUIRED WHEN FITTING Detailed recommendations are THE HOB WITHOUT A COOKER HOOD ABOVE...
Electrical Connections Any electrical work required to yellow/green and must be approx. 2 cm install this hob should be carried longer than the phase and neutral wires out by a qualified electrician or (Fig. 5). Fit the cable with a plug suitable competent person, in accordance for the load and connect it to a suitable with the current regulations.
Page 15
Ensure that the hob supply cord does not come into contact with surfaces with temperatures higher than 50 deg. C. The replacement of electric cable must be carried out exclusively by the service for- ce centre or by personnel with similar competencies, in accordance with the current regulations.
Page 16
Electrical connection to the ter- minal box The appliance is fitted with a five pole terminal box whose cables are predisposed for a 230 V monophase function (Fig. 6). In case of a different voltage, carry out the connection as shown in the table "CHOICE OF CONNECTION CABLE AND FUSE GUAGE"...
Installation The hob must be installed according to the instructions supplied. The hob must be installed by qualified personnel qualified personnel qualified personnel qualified personnel qualified personnel to the relevant rules and regulations in force. Please, ensure that, once the hob is installed, it is easily accessible for the engineer in the event of a breakdown.
Page 19
" Carry out the building in of the hob as follows: • place the seals supplied with the hob on the front edge of the cut out. Then, place them at 11 mm from the side edges and at 10 mm from the rear edge, as shown in the diagram, taking care that the seals meet without overlapping...
Building In On base cabinet with door Adequate arrangements must be ensured in the construction of the cabinet, to prevent possible contact with the overheated housing of the top during operation. The recommended solution for avoiding this problem is illustrated in Fig. 10. The panel under the top must be easily removed to allow securing and Fig.
Service and original spare parts This machine, before leaving the factory, has been tested and studied by many experts and specialists, in order to give you the best results. Any repair work which needs to be carried out should be done with the utmost care and attention.
Declaration of guarantee terms (for Belgium only) Declaration of guarantee terms (for Belgium only) Declaration of guarantee terms (for Belgium only) Declaration of guarantee terms (for Belgium only) Declaration of guarantee terms (for Belgium only) Our appliances are produced with the greatest of care. However, a defect may still occur.
Page 23
half an hour, the costs that result therefrom will be charged for. Connected damage caused by these removal and replacement operations will be the responsibility of the user. 12. If, during the guarantee period, repairing the same defect repeatedly is not con- clusive, or if the repair costs are considered disproportionate, in agreement with the consumer, the defective appliance may be replaced with another appliance of the same value.
Kingdom only) Standard guarantee conditions We, AEG-Electrolux, undertake that if within 12 months of the date of the purchase this AEG-Electrolux appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: ·...
When you contact the Service Force Centre you will need to give the following details: 1.Your name, address and postcode. 2.Your telephone number. 3. Clear concise details of the fault. 4. The model and Serial number of the appliance (found on the rating plate). 5.The purchase date.