1. Hazard switch "
"
Hazard switch "
"
With the key in the "ON" or "
tion, use this switch to turn on the haz-
ard light (simultaneous flashing of all
turn signal lights).
The hazard light is used in case of an
emergency or to warn other drivers
when your motorcycle is stopped
where it might be a traffic hazard.
CAUTION:
_
Do not use the hazard light for an ex-
tended length of time, otherwise the
battery may discharge.
_
INSTRUMENT AND CONTROL FUNCTIONS
1. Engine stop switch "
2. Start switch "
"
EAU03826
Engine stop switch "
" posi-
Set this switch to "
the engine. Set this switch to "
stop the engine in case of an emergen-
cy, such as when the motorcycle over-
turns or when the throttle cable is
stuck.
EC000006
Start switch "
Push this switch to crank the engine
with the starter.
CAUTION:
_
See page 5-1 for starting instruc-
tions prior to starting the engine.
_
/
"
EAU03890
/
"
" before starting
" to
3-10
EAU00143
"
EC000005
3