Save And Restore - D-Link DIR-300 User Manual

Section 3 - Configuration
This window allows you to save your configuration file to a hard drive, load configuration settings from a hard drive, and restore
the Router's factory default settings.
Save Settings Use this option to save the current router configuration
to Local Hard settings to a file on the hard disk of the computer you
Drive: are using. First, click the Save button. You will then
see a file dialog, where you can select a location and
file name for the settings.
Load Settings Use this option to load previously saved router
from Local Hard configuration settings. First, use the Browse control
Drive: to find a previously save file of configuration settings.
Then, click the Upload Settings button to transfer
those settings to the Router.
Restore to This option will restore all configuration settings
Factory Default back to the settings that were in effect at the time
Settings: the router was shipped from the factory. Any settings
that have not been saved will be lost, including any
rules that you have created. If you want to save the
current router configuration settings, use the Save
button above.
Reboots: Click the Reboots button on the left side of the
window to restart the Router.
D-Link DIR-300 User Manual

Save and Restore

3