D-Link DIR-300 User Manual page 29

Section 3 - Configuration
1. To enable WPA, WPA2, or WPA/WPA2, select either
Enable WPA Only Wireless Security (enhanced), Enable
WPA2 Only Wireless Security (enhanced), or Enable
WPA/WPA2 Wireless Security (enhanced).
2. Next to Cipher Type, select TKIP, AES, or Both.
3. Next to PSK/EAP, select PSK.
4. N e x t N e t w o r k
t o
p a s s p h r a s e . T h e k e y i s a n a l p h a - n u m e r i c
password between 8 and 63 characters long. The
password can include symbols (!?*&_) and spaces.
Make sure you enter this key exactly the same on all
other wireless clients.
5. Click Save Settings to save your settings. If you are
configuring the router with a wireless adapter, you will
lose connectivity until you enable WPA, WPA, or
WPA/WPA2 (whichever of the three options you have
selected above) on your adapter and enter the same
network key as you did on the router.
D-Link DIR-300 User Manual
K e y ,
e n t e r a