D-Link DIR-300 User Manual page 27

Section 3 - Configuration
Wi-Fi Protected
To implement Wi-Fi protection, or WCN 2.0, tick the
Setup:
Enable checkbox, click either Generate New PIN
or Reset PIN to Default, and then configure the Wi-
Fi settings below. Please see the Setting Up Wi-Fi
Protection (WCN 2.0 in Windows Vista) section later
in this manual for detailed configuration information.
Check the box to enable the wireless function. If you
Enable
do not want to use wireless, uncheck the box to disable
all the wireless functions.
Wireless Network Service Set Identifier (SSID) is the name of your
wireless network. Create a name using up to 3
Name:
characters. The SSID is case-sensitive.
Indicates the channel setting for the DIR-300. By
Wireless Channel:
default the channel is set to 6. The Channel can be
changed to fit the channel setting for an existing
wireless network or to customize the wireless network.
The Auto Channel Selection setting can be selected
to allow the DIR-300 to choose the channel with the
least amount of interference.
Transmission
Use the drop-down menu to select the appropriate Transmission Rate in Mbits per second. Many users will want to use the default setting,
Rate:
Best (automatic).
WMM Enable: Enable Wi-Fi Multimedia to enjoy basic quality of service features. WMM prioritizes traffic according to four access categories: voice,
video, best effort, and background.
Enable Hidden
Check this option if you would not like the SSID of your wireless network to be broadcasted by the DIR-300. If this option is checked,
Wireless:
the SSID of the DIR-300 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-300
in order to connect to it.
D-Link DIR-300 User Manual