Safety Information; Regulations - Canon CF-1 Operating Manual

Digital retinal camera

Hide thumbs

Table Of Contents

Table of Contents

000_L-IE-5152E_CF-1.book Page 3 Monday, July 29, 2013 10:30 AM

This instrument conforms to IEC 60601-1-2:2001/A1:2004 and IEC 60601-1-2:2007.

For USA and Canada

• When the CF-1 is going to be operated at a voltage of 240V in USA or Canada, be sure to

connect the instrument to a center tapped voltage source.

• This instrument is CLASS I EQUIPMENT according to UL60601-1.

WITH RESPECT TO ELETRIC SHOCK, FIRE MECHANICAL

AND OTHER SPECIFIED HAZARDS ONLY IN

ACCORDANCE WITH CAN/CSA C22.2 NO. 601.1,

MEDICAL EQUIPMENT CERTIFIED FOR CANADA

• Grounding reliability can only be achieved when the equipment is connected to an equiva-

lent receptacle marked "Hospital Only" or "Hospital Grade".

• The following mark indicates that the instrument is Type B Applied Parts (forehead rest and

chin rest).

• The degree of protection against ingress of water is IPX0.

• This equipment is not suitable for use in the presence of a flammable anaesthetic mixture

with air, oxygen or nitrous oxide.

• The mode of operation is Continuous Operation.

For EU Countries

• The following mark shows compliance of the instrument with Directive 93/42/EEC.

• This instrument is CLASS I EQUIPMENT according to EN 60601-1:2006 and IEC 60601-

1:2005.

• The following mark indicates that the instrument is Type B Applied Parts (forehead rest and

chin rest) according to EN 60601-1.

• The degree of protection against ingress of water is IPX0.

• This equipment is not suitable for use in the presence of a flammable anaesthetic mixture

with air, oxygen or nitrous oxide.

• The mode of operation is Continuous Operation.

Für Deutschland

• Während des Betriebs liegt der Schalldruckpegel dieses Instruments bei 70 dB(A) oder

weniger gemäß ISO 7779.