Advertisement
Setting Up the Linksys PAP2TNA
The Linksys PAP2T-NA is a SIP analog terminal adapter. It has one RJ45 Ethernet
interface to connect to your data network and two RJ11 FXS interfaces to connect to
analog devices such as analog telephones or fax machines. Each analog port on the
PAP2T-NA must be configured as an individual extension in Evolution PBX.
Configuring the PAP2TNA in Evolution PBX
To Configure a Basic Extension for the PAP2T-NA in Evolution PBX
1. Login to Evolution PBX, click the Resources tab then click Phone Extensions.
2. In the New Device field, select VoIP--GENERIC SIP and the Modify Phones
window displays.
3. In the Extension field, select an available extension.
4. In the Caller ID Name field, enter the name you want to be passed as this
extension's caller ID text.
5. In the Caller ID Number field, enter the number you want to be passed as this
extension's caller ID number.
6. In the Time Zone field, select the appropriate time zone for the time zone where
the phone will be located.
7. In the Remote Phone field, select Yes if the phone will not be on the same
subnet as the Evolution PBX server (for example, if the phone belongs to a user
that is located at a remote location). Select No if this is not the case.
Note: The other options on the Modify Phones frame are optional or advanced.
8. Click Save.
Note: The Evolution PBX Web configuration interface requires that your browser's popup
blocker be turned off or disabled so that the Device Settings screen can be seen.
9. Write down the device settings for your new extension that are displayed on the
screen. These settings will be used to configure your phone.
Page 3 of 4
Advertisement
