Rear Carrier; Auxiliary Dc Jack - Yamaha YFM40FBB Owner's Manual

Table of Contents

Advertisement

EBU18972

Rear carrier

G
Do not exceed the load limit of 80.0 kg (176 lb)
for the rear carrier.
G
Do not exceed the maximum load of 210.0 kg
(463 lb) for the ATV.
EBU19183

Auxiliary DC jack

4
The auxiliary DC jack is located at the front right
side of the ATV. The auxiliary DC jack can be used
for suitable work lights, radios, etc. The auxiliary
DC jack should only be used when the engine is
running and the light switch is set to "OFF".
1. Set the light switch to "OFF".
2. Turn the accessory off.
3. Start the engine. (See page 6-1.)
4. Open the auxiliary DC jack cap, and then in-
sert the accessory power plug into the jack.
1. Auxiliary DC jack
2. Auxiliary DC jack cap
Maximum rated capacity for the auxiliary DC
jack:
DC 12 V, 10 A (120 W)
5. Turn the accessory on.
6. When the auxiliary DC jack is not being used,
cover it with the cap.
ECB00120
NOTICE
G
Do not use accessories requiring more than
the above maximum capacity. This may
overload the circuit and cause the fuse to
blow.
4-21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yfm40fbhbBig bear 400 yfm40fbbBig bear 400 yfm40fbhb

Table of Contents