Checking And Lubricating The Cables - Yamaha YFM40FBB Owner's Manual

1. Locknut
2. Clutch adjusting screw
TIP
Turning the clutch adjusting screw out decreases
clutch free play and turning it in increases clutch
free play.
3. Tighten the locknut to the specified torque.
Tightening torque:
Locknut:
20 Nm (2.0 m·kgf, 14 ft·lbf)
TIP
When tightening the locknut, hold the adjusting
screw with a screwdriver so that the adjusting
screw does not turn together with the locknut.
EBU24901

Checking and lubricating the cables

The operation and the condition of all control ca-
bles should be checked before each ride, and the
cables and cable ends should be lubricated if nec-
essary. If a cable is damaged or does not move
smoothly, have a Yamaha dealer check or replace
it.
Recommended lubricant:
Engine oil
8-37
8