Analog Audio Cables; Digital Audio Cables - Pioneer HTP-700 Operating Instructions Manual

02 Connecting up
Important
• Compared to existing digital audio
transmission formats (optical and coaxial),
HDMI format digital audio transmissions
requires a longer time to be recognized.
Due to this, interruption in the audio may
occur when switching between formats or
beginning playback.
Additionally, turning on/off the component
connected to this unit's HDMI OUT
terminal or disconnecting/connecting the
HDMI cable may cause noise or
interrupted audio.

Analog audio cables

Use stereo RCA phono cables to connect
analog audio components. These cables are
typically red and white, and you should
connect the red plugs to R (right) terminals
and white plugs to L (left) terminals.

Digital audio cables

Commercially available coaxial digital audio
cables or optical cables should be used to
connect digital components to this system.
Coaxial digital audio cable
Note
1 • When connecting optical cables, be careful when inserting the plug not to damage the shutter protecting the optical
socket.
• When storing optical cable, coil loosely. The cable may be damaged if bent around sharp corners.
• You can also use a standard RCA video cable for coaxial digital connections.
28
En
Optical cable
Standard RCA video cables
These cables are the most common type of
video connection and are used to connect to
the composite video terminals. The yellow
plugs distinguish them from cables for audio.
1