Other Connections; Connecting External Antennas; Connecting Auxiliary Components; Connecting For Digital Audio - Pioneer DCS-575 Operating Instructions Manual

10

Other connections

Chapter 10
Other connections

Connecting external antennas

For an external AM antenna, use 5 m to 6 m of
vinyl-insulated wire and set up either indoors or
outdoors. Leave the loop antenna connected.
Only use the included AM loop antenna.
Indoor
antenna
(vinyl-coated
wire)
For an external FM antenna, use a PAL
connector to hook up an external FM antenna.
Connecting auxiliary
components
You can connect both analog and digital
external audio sources to this system. Digital
audio sources include digital satellite
receivers, CD recorders, etc.
We recommend using an HDMI cable to
connect sources that have HDMI terminals.
For more information see Connecting using
HDMI on page 36.
To listen to audio from a TV, connect the TV's
audio cable to one of the inputs on this unit.
34
En
Outdoor antenna
AM LOOP
5 m to 6 m
PAL connector

Connecting for digital audio

This system has optical-type digital inputs. Use
these to connect external components, such
as your digital TV, MD or CD recorder.
Digital TV
AV CONNECTOR
OPTICAL
LINE 2
MCACC
DIGITAL IN
SETUP MIC
• Connect the LINE 2 DIGITAL IN jack to
the digital output of an external playback
component.
These include digital components such as a
digital TV, an MD player, digital satellite, or a
game system.
Connecting an analog audio
component
You can use the (LINE 3) AUDIO IN jacks to
connect an analog audio component, such as
a tape player.
To audio
output
AC IN
To digital
output (optical)
LINE 1
IN
CONTROL VIDEO OUT
Tape deck, etc.
R
FRONT
LINE 3 IN LINE OUT
L L
R R
R
SURROUN
AUDIO SPEAK