Transferring A Connected Call - Cisco Razorline 7975 User Manual

Transferring a Connected Call

Transfer redirects a connected call. The target is the number to
which you want to transfer the call.
If you want to... Then...
Transfer a call Press the More soft key, and then press the Trans-
without talking to fer soft key. Enter the target number. When you
the transfer recipi- hear the call ringing, hang up or press End Call.
ent (blind transfer)
Talk to the transfer Press the More soft key, and then press the
recipient before Transfer soft key. Enter the target number and
transferring a call wait for the transfer recipient to answer. If the
(announced trans- recipient accepts the transferred call, hang up. If
fer) the recipient refuses the call, use the Navigation
button to scroll to the holding call and press Re-
sume.
Transfer a call to a
Press the More soft key, and then press the
voice mailbox
Transfer soft key. Dial the access code provided
to you by Razorline, then dial the target number
and hang up.
Cancel a transfer Use the Navigation button to scroll to the holding
call and press Resume.
Forwarding Your Calls to Another Num-
ber
If you want to... Then...
Set up call for- Press the Forward soft key and enter the forward-
warding for all ing number as you would dial it from your phone.
calls Press the Forward soft key again.
The display shows "Forwarded to xxxx"
Disable call for- Press the Forward soft key. Pick up and replace
warding the handset.
You can also dial 73*. After hearing verification,
hang up.
Page 14
If you want to... Then...
Enable/modify call Dial the number for Remote Access to Call For-
forwarding from a warding specified by Razorline. Enter your com-
remote location plete telephone number + #. If your phone is
configured as an extension only (non DID) line,
enter your company's complete main telephone
number + * + your extension number + #.
Enter your telephone password + #.
Enter the new forwarding number + #. For exter-
nal numbers use your outside access digit.
After hearing the verification, hang up.
Disable call for- Dial the number for Remote Access to Call For-
warding from a warding specified by Razorline. Enter your com-
remote location plete telephone number + #.
Enter your telephone password + #.
Press #. After hearing the verification, hang up.
Enable/modify call Lift the handset and dial 76*.
forward (Busy) - Enter the extension or forwarding number fol-
forwards calls to lowed by #. For external numbers, use your out-
another number side access digit.
when you are on a Press # to confirm followed by 2 to exit.
call Hang up.
Disable call for- Lift the handset and dial 77*
ward (Busy) Hang up.
Enable/modify call Lift the handset and dial 78*.
forward (No An- Enter the extension or forwarding number fol-
swer) - forwards lowed by #. For external numbers, use your out-
calls to another side access digit.
number when you Press # to confirm followed by 2 to exit.
don't answer Hang up.
Disable call for- Lift the handset and dial 79*
ward (No Answer) Hang up.
Access the selec- Lift the handset and dial *63
tive call forwarding Follow the voice prompts to enable, disable,
menu - forwards change the forwarding number, hear the forward-
calls from certain ing number, add or remove callers to forwarding
callers list, and to hear the forwarding list.
Page 15