Table of Contents
Advertisement
PARTS PROVIDED
Locate the parts packed with the hood.
Allen Wrench
Implement rods with standoffs
2 Grease trays (3 with 54" hood)
HARDWARE PACKAGE
Locate and check
contents. Screws
shown actual size.
2 Templates
Screw F
Blower safety screw and lock washer,
Phillips head M 6 x 16.
Note: Hardware appearance may vary slightly.
Installation Preparation
Duct collar
Screws A
4 (7/16")
hex head
wood
screws
Screws B
2 (1/8" x 1-1/2")
Phillips
pan head
screws.
Screws D
2 small
Phillips
head
screws
Screws C
8 blunt point
Phillips
screws
Screws E
2 Phillips
head wood
screws
Transition with Damper
2-piece decorative duct cover
2 Filters (3 with 54" hood)
ACCESSORY PACKAGE
Check accessory package.
Select the taller set for 9'6" to 10'4" ceilings.
Select the shorter set for 8'6" to 9'6" ceilings.
Discard unused set.
2 Support Frames
with 8 height
adjustment
screws
9
Support frame for 8 ft. ceiling
with 4 large pan head screws
installed on the bottom corners.
Decorative top cover
2 Sets of Duct Covers
4 Attachment Screws
Advertisement
Table of Contents
