Loading Data From A Memory Card - Casio CTK-6200 User Manual

Loading Data from a Memory
Card
• Make sure that all of the data you want to load is in the
MUSICDAT folder on the memory card.
To load data to Digital Keyboard memory
from a memory card
1.
Insert the memory card into the card slot.
2.
If the Digital Keyboard is in the card mode,
press the C-7 (CARD) button to exit the card
mode.
3.
Referring to the table in step 3 of the procedure
under "To save Digital Keyboard data to a
memory card" (page E-103), perform the
procedure required for the type of data you
want to load from the card.
• All setup registration banks are loaded as a batch.
Other data is loaded in area (data item) units.
4.
While holding down the R-13 (FUNCTION)
button, press the C-7 (LOAD/SAVE) button.
• This causes an "Xxxx Load"
below to appear. The sample screen below shows the
screen that appears from the rhythm screen.
5.
Use the dial or R-14 (–, +) buttons to display the
file you want to import.
6.
Press the R-16 (ENTER) button.
7.
In response to the "Sure?" message that
appears, press the R-14 (YES) button to load or
the R-14 (NO) button to cancel.
* The "Xxxx" part of the file name depends the type of data
on the memory card.
*
screen like the one shown
To batch load all Digital Keyboard memory
data from a memory card
1.
Press the C-7 (CARD) button to enter the card
mode.
2.
While holding down the R-13 (FUNCTION)
button, press the C-13 (MENU) button.
• This displays the function menu "Play/CardUtl" screen.
3.
Use the R-17 (t, y) buttons to move the 0 to
"AllData" and then press the R-16 (ENTER)
button.
• This displays the "All Load" screen.
• The remainder of the steps are the same as those from
step 5 under "To load data to Digital Keyboard memory
from a memory card".
Using a Memory Card
E-105