GE D20MX User Manual page 93

APPENDIX A: STANDARDS & PROTECTION
D20MX HARDWARE USER'S MANUAL
Standard Name Description
IEC 60068-2-31 Drop and topple
IEC 60068-2-78 Humidity Testing
1 To comply, the D20MX BIOS Spread Spectrum clock setting must be set to "disable". This
is the factory default.
2 To comply, the D20MX BIOS DRAM clock setting must be set to "HCLK-33M". This is the
factory default.
GENERAL
Test Specification
Dropping on each face Dropping on
each corner Toppling (or pushover)
For a total of 12 drops
96 hours steady state humidity at 40 °C
and 93% RH
93