Table of Contents
Advertisement
(7) Select an image-processing method
Move the cursor to "
press the SET key.
Next move the cursor to "COLOR FILTER SET"
using the up and down arrow keys and press the
SET key. Select "DETAIL" to enter the "COLOR
FILTER SET" screen.
(8) On the "
FILTER TYPE" item, select a filter from
the popup menu.
RED
Displays red areas more brightly.
GREEN
Displays green areas more brightly.
BLUE
Displays blue areas more brightly.
Displays areas that are within the specified brightness range (within
BRIGHT LEV
the specified upper and lower limits) more brightly.
Specify the optimum color filter parameters to use, based on the
ANY
original image conditions.
After the settings are complete, press the ESC key to return to the "SET WIZARD" screen.
(9) Move the cursor to the "
the up and down arrow keys, and press the SET
key. Select "INSPECT NG" from the popup
menu. Then, select "NEXT" to move to the next
screen.
COLOR FILTER" and
MEAS SEL" line using
7-15
Setting Examples Using the Set Wizard
SET WIZARD
EXIT
[SAMPLE]
SELECT A COLOR IMAGE
PROCESSING MODE
1COLOR FILTER
2EXTRACT COLOR
COLOR FILTER SET
DETAIL
SELECT A MEASUREMENT TYPE
1MEAS SEL
COLOR FILTER SET
SCREEN COND SAVE
1FILTER TYPE
RED
RED
GREEN
BLUE
BRIGHT LEV
ANY
SET WIZARD
EXIT
[SAMPLE]
SELECT A COLOR IMAGE
PROCESSING MODE
1COLOR FILTER
2EXTRACT COLOR
COLOR FILTER SET
DETAIL
SELECT A MEASUREMENT TYPE
1MEAS SEL
TYPE00
Start
STEP1 PARALLEL SERIAL USB
STEP2 CAPTURE IMG/PARTIAL-IMG
STEP3 MEAS1/CAM1
End
COLOR F C1 BRT
TYPE00
Start
STEP1 PARALLEL SERIAL USB
STEP2 CAPTURE IMG/PARTIAL-IMG
STEP3 MEAS1/CAM1
STEP4 MEAS1/F/INSPECT NG
End
NO
POSI-DEVIATION
CHK-DEG-MATCH
INSPECT-LEAD
INSPECT-BGA/CSP
MEAS-BIN-AREA
CNT-BIN-OBJ
LABEL-BIN-OBJ
POINT-MEAS
MULTI-POSI
MULTI MATCHES
INSPECT NG
7
Advertisement
Table of Contents
