Table of Contents
Advertisement
EXEC
After completing entry, select "
A screen shown below will appear and the controller will start saving data to the memory card.
SAVING...
When this screen disappears, saving is complete.
When "READ" or "SAVE AS" is selected
SELECT FILE (TO NEXT SUB-MENU)
Select "
SELECT FILE (TO NEXT SUB-MEN)"
using the up and down arrow keys, and press the
SET key to go to a sub menu.
On the "FILE LIST" screen, file names currently
stored in the memory card are displayed. Select a
file to read or overwrite, and press the SET key.
The selected file name will be displayed under the
"FLE TYPE" line.
EXEC
Select "
EXEC" and press the SET key.
A screen shown below will appear.
UNDER ACCESS...
Note: When "SAVE AS" is selected, "UNDER ACCESS..." will appear on the screen.
EXEC" and press the SET key.
MEMORY CARD
1TRANSMISSION METHOD
2SELECT FILE
FILE TYPE
FILE NAME
3EXEC
FILE LIST
PAGE NO.
1PAGE CHNG
FILE NAME
SMPL1
MEMORY CARD
1TRANSMISSION METHOD
2SELECT FILE
FILE TYPE
FILE NAME
3EXEC
MEMORY CARD
1TRANSMISSION METHOD
2SELECT FILE
FILE TYPE
FILE NAME
3EXEC
6-19
Setting and Operating Outlines
SCREEN SAVE
READ
(TO NEXT SUB-MENU)
PARAM
AAA
(SET KEY)
SCREEN SAVE
TYPE
SIZE
RENEWAL DATE MODEL COMMENT
PARAM 210
0115
Sample1
SCREEN SAVE
READ
(TO NEXT SUB-MENU)
PARAM
AAA
(SET KEY)
SCREEN SAVE
READ
(TO NEXT SUB-MENU)
PARAM
AAA
(SET KEY)
COLOR F C1 BRT
COLOR F C1 BRT
6
COLOR F C1 BRT
COLOR F C1 BRT
Advertisement
Table of Contents
